|
|
Control Unit for Autonomous Vacuum Cleaner
Matějů, Jan ; Kopečný, Lukáš (referee) ; Žalud, Luděk (advisor)
This paper is in introduction focused on review of robotic vacuum cleaning and evaluation of available products qualities. However the main focus of this paper is system design of all subsystems, control systems and PCD design of robot electronics. In this paper is also described a method for evaluating approximate distance of robot from the obstacle. There are also described problems of system design of IR proximity sensors. The last part of this work is development of control software for robot and its testing.
|
|
|
Docking Station for Automatic Charging of Batteries of Robot
Beran, Jan ; Janoušek, Vladimír (referee) ; Rozman, Jaroslav (advisor)
The aim of this thesis is to create a functional docking and charging system for the Trilobot robot, which is improved and modified for use in future projects as a part of this thesis. The theoretical part discusses the path planning methods, battery types and charging methods, types of docking stations and the charging method itself. Also, a robot refurbishment design is presented, which is then implemented, along with the docking station. The refurbished robot has functional control software in the ROS framework, which allows it to perform not only the task of autonomous battery charging. In this thesis, a test of the whole system is also performed and the results are evaluated.
|
|
|
Control software for autonomous mobile robot
Vojta, Jakub ; Marada, Tomáš (referee) ; Věchet, Stanislav (advisor)
Bachelor thesis focuses on software development for mobile autonomous robot with a microcontroller control unit. It provides an overview to sensors for mobile ground robots on a level necessary for control software programmer. It further analyzes microcontrollers and their architecture and programming. At the end of the thesis is theoretical description of deployed navigational software and communication protocol between control unit and computer.
|
|
|
Control of underwater exploring robot
Válek, Zdeněk ; Hadaš, Zdeněk (referee) ; Houška, Pavel (advisor)
This diploma thesis is dealing with design of explorative robot named Gloin, which is designed especially for the exploration and mapping of the underwater part of Hranická propast, which is the second deepest fresh-water abbys in the world. This thesis is concentrating on design of algorithms needed for control and navigation of robot in the abyss. The designed algorithms are verified by simulation.
|
|
|
Unconventional Signals Oscillators
Hruboš, Zdeněk ; Galajda, Pavol (referee) ; Štork, Milan (referee) ; Petržela, Jiří (advisor)
Dizertační práce se zabývá elektronicky nastavitelnými oscilátory, studiem nelineárních vlastností spojených s použitými aktivními prvky a posouzením možnosti vzniku chaotického signálu v harmonických oscilátorech. Jednotlivé příklady vzniku podivných atraktorů jsou detailně diskutovány. V doktorské práci je dále prezentováno modelování reálných fyzikálních a biologických systémů vykazujících chaotické chování pomocí analogových elektronických obvodů a moderních aktivních prvků (OTA, MO-OTA, CCII ±, DVCC ±, atd.), včetně experimentálního ověření navržených struktur. Další část práce se zabývá možnostmi v oblasti analogově – digitální syntézy nelineárních dynamických systémů, studiem změny matematických modelů a odpovídajícím řešením. Na závěr je uvedena analýza vlivu a dopadu parazitních vlastností aktivních prvků z hlediska kvalitativních změn v globálním dynamickém chování jednotlivých systémů s možností zániku chaosu v důsledku parazitních vlastností použitých aktivních prvků.
|
|
|
System for Autonomous Navigation of Toy Car on a Race Track
Katrušák, Jaroslav ; Bidlo, Michal (referee) ; Šimek, Václav (advisor)
The goal of this project is the implementation of a system for autonomous control of a toy car model on a racetrack. First part of this project is a study of typical ways of laying out a racetrack for the movement of a model car and a follow-up study of possible ways of implementing the autonomous movement of the model on the racetrack. The next part is devoted to the hardware and software side of the implementation of the proposed system. The penultimate part presents the proposed system for obstacle detection, it's implementation and resulting properties. The last part of the project presents the final implementation of an autonomous model capable of independent driving on a set racetrack, reading signs and reaction to obstacle located on the track.
|
|
|
Telepresence Autonomous Robot for Exploration of Unapproachable Areas
Krkavec, Martin ; Janoušek, Vladimír (referee) ; Rozman, Jaroslav (advisor)
The subject of this master's thesis was to get familiar with a robot developed at the Department of Intelligent Systems of FIT VUT Brno. The goal of this work was to design and then implement hardware and software improvements of the robot so it could be capable of telepresence exploration of a narrow cave using remote control, including autonomous return back to the entrance. Also suggest possible extensions for a further improvement of the robot.
|
|
|
Floating Robot KAMBoat II
Beneš, Jiří ; Žalud, Luděk (referee) ; Kopečný, Lukáš (advisor)
Objective of this thesis is to design and create second generation of KAMboat type robotic ship. Main tasks are to test abilities and performance of the ship alone and in comparison with the previous model. This thesis is divided into subparts which compare the differences between the two prototypes. First chapter focuses on analyzing selected parts of ship’s physical model, especially the hydrodynamics, which is then used to define construction limits. Following chapters KAMboat 1 and Construction analysis describe the first version of ship and reasons of making new version. Chapter KAMboat 2 refines the theoretical knowledge gained in previous chapter into tangible form. Chapter Electronics describes selected electronic equipment of the ship and mounted circuitry. The Control chapter is focused on combining theoretical and practical aspects of driving a small BLDC engine. Controls and Communications chapter describes how to secure and maintain data flow between operator and the robot. Chapter Missions is selection of tasks that are supported on KAMboat 2 type robotic ship.
|
|
|
Sensoric system for robotic chassis
Hůlka, Jakub ; Hadinec, Michal (referee) ; Klusáček, Stanislav (advisor)
This thesis deals with selection of a suitable robotic undercart for industrial environments. This undercart is further enhanced by a sensory system, that provides interaction with the robot's surroundings. For the proposed scheme is created its own control board, that performs service sensors and other peripherals. There is also described development of the program to your PC for operator control the robot.
|
|
|
Design of an Universal Fire Robot
Dlabaja, Štěpán ; Surman, Martin (referee) ; Křenek, Ladislav (advisor)
The topic of this master thesis is conceptual design of firefighting robot. The thesis shows alternative approach to designing robot in comparison with other current designs. The final product is quadrupedal robot, which can either walk or move on tracks. Robot is designed for indoor and outdoor firefighting.
|
guest ::
